How to configure monoblock LNB in FTA Recievers

Mono block LNB is a Combination of two Universal Ku band LNBs and One output. This LNB can receive signals from two adjacent satellites (Difference of 4.5+- Degrees, like 100.5° and 95° degree) Usually Using For Receiving HD Signals and SD signals of Dishtv DTH  in single STB .


Now we can use this type of LNBs in FTA DVBS2 HD satellite Receivers like solid and Openbox Brands 


But The Receiver needs some satellite configuration to get signals using Monoblock LNB

By Using this LNB we can Watch Eutelsat 70B@70° and ABS2@75° satellites in single dish



I am using this Satellites as examples Eutelsat 70B@70° on main block  and ABS2@75° on side block


First of all Add Two New Satellite named Eutelsat 70B and ABS2 with Universal Ku band Settings

Settings For Direct LNB Connection  (Without DiSEqC Switch)





Main Block (Eutelsat  70 B @70°) 



Open the satellite Setup Menu in Receiver

Select Satellite name Eutelsat  70B 

Select the DiSEqC  Mode to DisEque 1.0

and the select DiSEqC Port to A or 1





Side Block (ABS2 @75°) 



Select Satellite name ABS2 

Select the DiSEqC  Mode to DiSEqC 1.0

and the select DiSEqC Port to B or 2




Settings for DiSEqC 1.0 Switch (4x1)


Main Block (Eutelsat  70 B @70°) 












Select Satellite name Eutelsat  70B 

Select the DiSEqC  Mode to DiSEqC 1.0

Select DiSEqC Port ( port which the LNB is connected  to )

Change the Tone Burst Mode To Tone Burst A or 1



Side Block (ABS2 @75°) 




Select Satellite name ABS2

Select the DiSEqC  Mode toDiSEqC1.0

Select DiSEqC Port ( port which the LNB is connected  to )

Change the Tone Burst Mode To Tone Burst B or 2




Settings for DiSEqC 1.1 Switch (8x1)


Main Block (Eutelsat  70 B @70°) 


Select Satellite name Eutelsat  70B 

Select the DiSEqC  Mode to DiSEqC 1.1

Select DiSEqC Port ( port which the LNB is connected  to )

Change the DiSEqC 1.0 To   A or 1






Side Block (ABS2 @75°) 




Select Satellite name ABS2

Select the DiSEqC  Mode to DiSEqC 1.1

Select DiSEqC Port ( port which the LNB is connected  to )

Change the  DiSEqC 1.0 To  B or 2


Previous
Next Post »

1 comments:

Click here for comments
8 May 2016 at 08:53 ×

keep checking the blog for more ..

Congrats bro smart blogger you got PERTAMAX...! hehehehe...
Reply
avatar